support package for arduino hardware Search Results


arduino hardware  (MathWorks Inc)
90
MathWorks Inc arduino hardware
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Arduino Hardware, supplied by MathWorks Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/arduino hardware/product/MathWorks Inc
Average 90 stars, based on 1 article reviews
arduino hardware - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
simulink arduino support package  (MathWorks Inc)
96
MathWorks Inc simulink arduino support package
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Simulink Arduino Support Package, supplied by MathWorks Inc, used in various techniques. Bioz Stars score: 96/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/simulink arduino support package/product/MathWorks Inc
Average 96 stars, based on 1 article reviews
simulink arduino support package - by Bioz Stars, 2026-03
96/100 stars
  Buy from Supplier
support package for arduino hardware  (MathWorks Inc)
90
MathWorks Inc support package for arduino hardware
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Support Package For Arduino Hardware, supplied by MathWorks Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/support package for arduino hardware/product/MathWorks Inc
Average 90 stars, based on 1 article reviews
support package for arduino hardware - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
arduino arduini  (Iperboreal Pharma S r l)
90
Iperboreal Pharma S r l arduino arduini
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Arduino Arduini, supplied by Iperboreal Pharma S r l, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/arduino arduini/product/Iperboreal Pharma S r l
Average 90 stars, based on 1 article reviews
arduino arduini - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
l-carnitine  (Iperboreal Pharma S r l)
90
Iperboreal Pharma S r l l-carnitine
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
L Carnitine, supplied by Iperboreal Pharma S r l, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/l-carnitine/product/Iperboreal Pharma S r l
Average 90 stars, based on 1 article reviews
l-carnitine - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
band pass filter  (Thorlabs)
90
Thorlabs band pass filter
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Band Pass Filter, supplied by Thorlabs, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/band pass filter/product/Thorlabs
Average 90 stars, based on 1 article reviews
band pass filter - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
4-channel solid state relay seeed studio 103020133 spdt relay  (RS Components)
90
RS Components 4-channel solid state relay seeed studio 103020133 spdt relay
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
4 Channel Solid State Relay Seeed Studio 103020133 Spdt Relay, supplied by RS Components, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/4-channel solid state relay seeed studio 103020133 spdt relay/product/RS Components
Average 90 stars, based on 1 article reviews
4-channel solid state relay seeed studio 103020133 spdt relay - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
irf520 power mosfet sihf520  (Vishay Inc)
90
Vishay Inc irf520 power mosfet sihf520
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Irf520 Power Mosfet Sihf520, supplied by Vishay Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/irf520 power mosfet sihf520/product/Vishay Inc
Average 90 stars, based on 1 article reviews
irf520 power mosfet sihf520 - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
data logging shield  (Velleman Inc)
90
Velleman Inc data logging shield
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Data Logging Shield, supplied by Velleman Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/data logging shield/product/Velleman Inc
Average 90 stars, based on 1 article reviews
data logging shield - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
arduino  (SparkFun Electronics)
90
SparkFun Electronics arduino
MATLAB functions to control the <t> Arduino </t> to trigger the pulse generator channels
Arduino, supplied by SparkFun Electronics, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/arduino/product/SparkFun Electronics
Average 90 stars, based on 1 article reviews
arduino - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
arduino nano  (MathWorks Inc)
90
MathWorks Inc arduino nano
Stretcher components and assembly. (A) All plastic components for the stretcher were 3D printed in PLA. The stretcher frame (1) is designed to seat into the stage of a Nikon A1R confocal microscope. It was also designed to accept a motor (9) and motor cover (3), two metal rods (8) and has holes for a number of bolts (7) to attach the motor as well as the PDMS membrane. The ‘motor hand’ (2), accepts the motor arm into a pocket, and is then attached via a screw. The motor is controlled using the <t>Arduino</t> <t>Nano</t> (5). The PDMS membrane is attached to the stretcher using three bolts on each side, one through the motor hand (2, with bolts shown), and the other in the stretcher frame at the end opposite from the motor (shown in A with no bolts). The membrane is secured by placing washers (4) over the PDMS and bolts, and then securing everything with nuts that have been set into 3D printed cylinders (6). (B) A top-down view of the assembled stretcher without PDMS membrane. Note the metal rods have been pushed into the frame (1) and the motor hand (2) is guided along the metal rods. The motor is mounted to the frame with help of a motor cover (3). (C) View of the assembled stretcher from below. (D) Assembled stretcher with PDMS membrane mounted. (E) Close-up of the membrane attachment site. Note the washer on top of the PDMS helps not only to secure the membrane in place, but also distribute the pressure from the screws evenly across the PDMS.
Arduino Nano, supplied by MathWorks Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/arduino nano/product/MathWorks Inc
Average 90 stars, based on 1 article reviews
arduino nano - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier
arduino mega  (Atmel Corporation)
90
Atmel Corporation arduino mega
Stretcher components and assembly. (A) All plastic components for the stretcher were 3D printed in PLA. The stretcher frame (1) is designed to seat into the stage of a Nikon A1R confocal microscope. It was also designed to accept a motor (9) and motor cover (3), two metal rods (8) and has holes for a number of bolts (7) to attach the motor as well as the PDMS membrane. The ‘motor hand’ (2), accepts the motor arm into a pocket, and is then attached via a screw. The motor is controlled using the <t>Arduino</t> <t>Nano</t> (5). The PDMS membrane is attached to the stretcher using three bolts on each side, one through the motor hand (2, with bolts shown), and the other in the stretcher frame at the end opposite from the motor (shown in A with no bolts). The membrane is secured by placing washers (4) over the PDMS and bolts, and then securing everything with nuts that have been set into 3D printed cylinders (6). (B) A top-down view of the assembled stretcher without PDMS membrane. Note the metal rods have been pushed into the frame (1) and the motor hand (2) is guided along the metal rods. The motor is mounted to the frame with help of a motor cover (3). (C) View of the assembled stretcher from below. (D) Assembled stretcher with PDMS membrane mounted. (E) Close-up of the membrane attachment site. Note the washer on top of the PDMS helps not only to secure the membrane in place, but also distribute the pressure from the screws evenly across the PDMS.
Arduino Mega, supplied by Atmel Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/result/arduino mega/product/Atmel Corporation
Average 90 stars, based on 1 article reviews
arduino mega - by Bioz Stars, 2026-03
90/100 stars
  Buy from Supplier

Image Search Results


MATLAB functions to control the Arduino to trigger the pulse generator channels

Journal: STAR Protocols

Article Title: Protocol for precise signal synchronization of electrophysiology, videography, and audio recordings using a custom-made pulse generator

doi: 10.1016/j.xpro.2023.102306

Figure Lengend Snippet: MATLAB functions to control the Arduino to trigger the pulse generator channels

Article Snippet: Support for Arduino Hardware , MathWorks , https://www.mathworks.com/help/supportpkg/arduinoio/ug/intro.html.

Techniques: Control

Journal: STAR Protocols

Article Title: Protocol for precise signal synchronization of electrophysiology, videography, and audio recordings using a custom-made pulse generator

doi: 10.1016/j.xpro.2023.102306

Figure Lengend Snippet:

Article Snippet: Support for Arduino Hardware , MathWorks , https://www.mathworks.com/help/supportpkg/arduinoio/ug/intro.html.

Techniques: Software

Materials required to build a pulse generator

Journal: STAR Protocols

Article Title: Protocol for precise signal synchronization of electrophysiology, videography, and audio recordings using a custom-made pulse generator

doi: 10.1016/j.xpro.2023.102306

Figure Lengend Snippet: Materials required to build a pulse generator

Article Snippet: Support for Arduino Hardware , MathWorks , https://www.mathworks.com/help/supportpkg/arduinoio/ug/intro.html.

Techniques:

Stretcher components and assembly. (A) All plastic components for the stretcher were 3D printed in PLA. The stretcher frame (1) is designed to seat into the stage of a Nikon A1R confocal microscope. It was also designed to accept a motor (9) and motor cover (3), two metal rods (8) and has holes for a number of bolts (7) to attach the motor as well as the PDMS membrane. The ‘motor hand’ (2), accepts the motor arm into a pocket, and is then attached via a screw. The motor is controlled using the Arduino Nano (5). The PDMS membrane is attached to the stretcher using three bolts on each side, one through the motor hand (2, with bolts shown), and the other in the stretcher frame at the end opposite from the motor (shown in A with no bolts). The membrane is secured by placing washers (4) over the PDMS and bolts, and then securing everything with nuts that have been set into 3D printed cylinders (6). (B) A top-down view of the assembled stretcher without PDMS membrane. Note the metal rods have been pushed into the frame (1) and the motor hand (2) is guided along the metal rods. The motor is mounted to the frame with help of a motor cover (3). (C) View of the assembled stretcher from below. (D) Assembled stretcher with PDMS membrane mounted. (E) Close-up of the membrane attachment site. Note the washer on top of the PDMS helps not only to secure the membrane in place, but also distribute the pressure from the screws evenly across the PDMS.

Journal: Biology Open

Article Title: Design of a 3D printed, motorized, uniaxial cell stretcher for microscopic and biochemical analysis of mechanotransduction

doi: 10.1242/bio.057778

Figure Lengend Snippet: Stretcher components and assembly. (A) All plastic components for the stretcher were 3D printed in PLA. The stretcher frame (1) is designed to seat into the stage of a Nikon A1R confocal microscope. It was also designed to accept a motor (9) and motor cover (3), two metal rods (8) and has holes for a number of bolts (7) to attach the motor as well as the PDMS membrane. The ‘motor hand’ (2), accepts the motor arm into a pocket, and is then attached via a screw. The motor is controlled using the Arduino Nano (5). The PDMS membrane is attached to the stretcher using three bolts on each side, one through the motor hand (2, with bolts shown), and the other in the stretcher frame at the end opposite from the motor (shown in A with no bolts). The membrane is secured by placing washers (4) over the PDMS and bolts, and then securing everything with nuts that have been set into 3D printed cylinders (6). (B) A top-down view of the assembled stretcher without PDMS membrane. Note the metal rods have been pushed into the frame (1) and the motor hand (2) is guided along the metal rods. The motor is mounted to the frame with help of a motor cover (3). (C) View of the assembled stretcher from below. (D) Assembled stretcher with PDMS membrane mounted. (E) Close-up of the membrane attachment site. Note the washer on top of the PDMS helps not only to secure the membrane in place, but also distribute the pressure from the screws evenly across the PDMS.

Article Snippet: The Arduino Nano is both programmed and controlled through a program on MATLAB R2016b (The full code can be found https://github.com/Henning-Horn ), in which the value of 0 retracts the motor hand and a value of 1 extends it.

Techniques: Microscopy, Membrane

Stretcher control and actuation specifications. (A) A linear actuation motor can be controlled either from a laptop via an external Arduino Nano board or (B) via wifi from any android or IOS device through Blynk IoT platform. (C) The percent stretch is the difference (in mm) between the stretched and relaxed membrane dimensions in the x-axis, divided by the relaxed membrane dimensions. The user inputs the following variables: percent stretch, time to hold stretch (T E ), and rest period between stretches (T R ). Times to transition between unstretched and stretched is dependent on motor specifications. For illustration, three possible stretching scenarios are shown on the right: (i) a cyclic stretch with low percent membrane stretch, (ii) a cyclic stretch with high percent membrane stretch and shorter rest intervals (T R ) between stretching, and (iii) a static stretch.

Journal: Biology Open

Article Title: Design of a 3D printed, motorized, uniaxial cell stretcher for microscopic and biochemical analysis of mechanotransduction

doi: 10.1242/bio.057778

Figure Lengend Snippet: Stretcher control and actuation specifications. (A) A linear actuation motor can be controlled either from a laptop via an external Arduino Nano board or (B) via wifi from any android or IOS device through Blynk IoT platform. (C) The percent stretch is the difference (in mm) between the stretched and relaxed membrane dimensions in the x-axis, divided by the relaxed membrane dimensions. The user inputs the following variables: percent stretch, time to hold stretch (T E ), and rest period between stretches (T R ). Times to transition between unstretched and stretched is dependent on motor specifications. For illustration, three possible stretching scenarios are shown on the right: (i) a cyclic stretch with low percent membrane stretch, (ii) a cyclic stretch with high percent membrane stretch and shorter rest intervals (T R ) between stretching, and (iii) a static stretch.

Article Snippet: The Arduino Nano is both programmed and controlled through a program on MATLAB R2016b (The full code can be found https://github.com/Henning-Horn ), in which the value of 0 retracts the motor hand and a value of 1 extends it.

Techniques: Control, Membrane